Filter
Top Products
26
FIGURE 26
STEP 27:
FIGURE 27
STEP 26:
• Assemble two FLOOR ROLLER WHEELS (74) to the BENCH FOOT (24) using two 1/2” X 1-1/2” CLEVIS PINS (104) and two
1/2” EXTERNAL RETAINING RING (103) as shown in FIGURE 26.
• Assemble one U-PIN (110) to the BENCH SEAT ADJUST (28) using one 1/2” EXTERNAL RETAINING RING (103).
24
103
74
104
• Securely assemble one PLUNGER PIN (77) to the BENCH SEAT ADJUST (28) as shown.(NOTE: Screw PLUNGER PIN (77)
in all the way.)
• CAREFULLY insert the BENCH SEAT ADJUST (28) into the BENCH FRAME (23) as shown. The SEAT can be adjusted using the
PLUNGER PIN (77).
23
77
110
28
103
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
101
• Securely assemble one 10/32” SET SCREW (101) to the plunger pin barrel on the BENCH SEAT ADJUST (28) then back off
1/4 turn so PLUNGER PIN (77) rotates freely.