Filter
Top Products
37
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
FIGURE 46
44
STEP 46:
83
22
3/8 X 6” 121
105
57
47
• Assemble two BOOM PULLEY PLATES (22), three 3-1/2” PULLEYS (44) and two CABLE RETAINING CLIPS (105) to the BASE
PLATES (11) using one 3/8 X 6” BOLT (121), two 3/8 X 1” SPACERS (57) and one 3/8” LOW HEIGHT LOCK NUT (83). See
FIGURE 46. (Note: Loop the PRESS/LEG CABLE (47) around the PULLEY prior to assembling the center PULLEY to the
BASE PLATES.) (NOTE: Make sure CABLE RETAINING CLIPS (105) are positioned as shown.)
44