Filter
Top Products
EC-1200 EC-1600 EC-3600 EC-3700
Applicable Models:
Cateye Ergociser Series 1000 Service Manual
55
ON
OFF
MS-18
MS-19
Fig. 1
Replacing the Crank Cover
REMOVAL
1. Remove both right and left pedals. (Fig. 1)
2. Loosen and remove the fixing screw on the surface of the
crank cover. The narrow-width area of the crank cover should
position in between the frame cover and the crank. (Figs 2 & 3)
ASSEMBLING
1. Pass the crank through the hole on the crank cover, and fix the
crank cover onto the frame cover with screws. (Figs. 2 & 3)
2. Set the right and left pedals.
No.15 Wrench
Crank
Pedal
Fig. 2
Upright Type
Crank Cover
Fig. 3
Recumbent Type
Crank Cover
Replacing the Crank Cover