Filter
Top Products
Cateye Ergociser Series 1000 Service Manual
48
EC-1200 EC-1600 EC-3600 EC-3700
Applicable Models:
MS-11
MS-11
Fig. 1
Adjusting the Spacer Spring
1. Remove the center cover, by referring to the Section MS-19
"Replacing the Center Cover of Upright Type."
2. Slightly loosen the lock nut at the side of the frame. (Fig. 1)
3. Fasten the adjust screw so that the seat post (handleber post)
will drop slowly.
4. Fasten the lock nut to fix the adjust screw.
5. Assemble the center cover, by referring to the Section MS-19
"Replacing the Center Cover of Upright Type."
Lock Nut
Adjust Screw
Adjusting the Spacer Spring