Filter
Top Products
EC-1200 EC-1600 EC-3600 EC-3700
Applicable Models:
Cateye Ergociser Series 1000 Service Manual
51
MS-14
MS-14
Fig. 1
Replacing the Leg Cover
REMOVAL
1. Remove the leg pipe from the main body. Also, remove the
levelling knob. (Fig. 1)
2. Apply a screwdriver or the like to the damaged leg cover, and
knock the cover off, paying attention not to damage the caster.
(Fig. 2)
ASSEMBLING
1. Set the legcover onto the leg, and hammer it in. The use of a
wood block is recommended as a buffer. (Fig. 2)
* A direct hammering of the leg cover may damage the
legcover.
2. Mount the levelling knob and assemble it to the frame.
Levelling Knob
Fig. 2
Leg Cover
Screwdriver
Fig. 3
Leg Cover
Replacing the Leg Cover