Name Function
D
[Capture] button
Takes a snapshot of the projected screen. After taking the
snapshot, the image is pasted onto a new page in
Whiteboard Mode. (This button cannot be used in
Whiteboard Mode.)
s "Using the Interactive Features" p.71
E
[Print] button
Prints the projected screen.
s "Printing Drawing Contents in Whiteboard Mode"
p.94
s "Printing Drawing Contents in Annotation Mode"
p.109
F
[Save] button
Saves the projected image to USB storage or a network
folder.
s "Saving Drawing Contents in Whiteboard Mode"
p.93
s "Saving Drawing Contents in Annotation Mode"
p.109
G
USB-B port (for
connecting a
computer)
Connects to a computer via a USB cable to use the
interactive features or USB Display.
s "Connecting to the Control Pad" p.48
H
USB-A port (for
connecting USB
storage)
Connects a USB storage device.
s "Connecting to the Control Pad" p.48
I
USB-A port (for
connecting a printer)
Connects to a printer via a USB cable.
s "Connecting to the Control Pad" p.48
J
USB-B port (for
connecting a
projector)
Connects to the projector via a USB cable when a USB
storage device or printer is connected to the Control Pad.
s
"Connecting to the Control Pad" p.48
K
USB-A port (for
connecting a
projector)
Connects to a projector via a USB cable to use the
interactive features or USB Display.
s "Connecting to the Control Pad" p.48
Name Function
L
Remote port
When the Control Pad is connected to the projector using
the optional remote control cable set, power is supplied
from the projector.
a
When not connected using the remote
control cable set, power is supplied by the
batteries. Projector operations are per‐
formed using infrared signals.
M
Remote control light-
emitting area
Outputs remote control signals.
N
Bottom cover
Open to connect a USB storage device.
O
Top cover
Open to connect cables and replace the batteries.
P
Cable cover
Open this cover when cables are wired along a wall.
Replacing the Batteries for the Control Pad
If the Control Pad becomes unresponsive or inoperable after it has been
used for some time, the batteries may have reached the end of their service
life. When this happens, replace them with new batteries. Obtain two AA
size manganese or alkaline batteries. We recommend using alkaline batteries
to power the Control Pad. You cannot use other batteries except for the AA
size manganese or alkaline.
Attention
Make sure you read the following manual before handling the batteries.
s Safety Instructions
a
Because power is supplied to the Control Pad when it is connected to
the projector with the remote control cable set, you do not need
batteries.
Part Names and Functions
25
