Check Remedy
Is direct sunlight or strong light from fluorescent lamps shining onto
the remote receiver?
Set the projector up in a location where strong light does not shine onto the remote receiver. Or set the remote receiver to
Off from Remote Receiver in the Configuration menu.
s Settings - Remote Receiver p.178
Is the correct setting for the Remote Receiver selected? Check the Remote Receiver from the Configuration menu.
s Settings - Remote Receiver p.178
Are the batteries dead or have the batteries been inserted in the
wrong direction?
Insert new batteries in the correct direction.
s "Replacing the Remote Control Batteries" p.20
I Want to Change the Language for Messages and Menus
Check Remedy
Change the language setting. Adjust the Language setting from the Configuration menu.
s Extended - Language p.179
The Authentication Setting of Wireless LAN Fails
Check Remedy
Is the time set correctly? If the wireless LAN is set correctly but the authentication setting fails, the time may not be set correctly. Check
if it is set correctly.
s Extended - Time/Schedule Settings p.179
Mail is Not Received even if an Error Occurs with the Projector
Check Remedy
Is Standby Mode set to Communication On? To use the Mail Notification function when the projector is in standby, set Communication On in Standby Mode from
the Configuration menu.
s ECO - Standby Mode p.199
Problem Solving
225
