Sub-menu Function
Subnet Mask
You can input the
Subnet Mask
g
for the projector. You can enter
a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Ad‐
dress
You can input the IP address for the gateway for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following
Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
DNS server
By setting a mail server and host name, the DNS server allows you
to send emails of annotations created using the interactive
feature.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.9.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
When DHCP is set to On, DNS server information is acquired
using DHCP. At that time, these settings are given priority.
WINS server
By specifying a network folder as a save location, WINS server
allows you to save the annotation content created using the
interactive features. Set this when using WINS server and
specifying a network folder on a different subnet.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.9.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
If you are not setting a WINS server, set 0.0.0.0.
When DHCP is set to On, WINS server information is acquired
using DHCP. At that time, these settings are given priority.
IP Address Dis‐
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to Off.
Administrator Settings Menu
Sub-menu Function
Administrator
Password
Enter the password for the Administrator Settings menu for
network settings.
You can enter up to 16 single-byte alphanumeric characters (*
cannot be used).
If the administrator password is not set, click OK with an empty
password box.
The Administrator Password is also used for Whiteboard
Settings.
s
"Basic Menu" p.184
Network Host
Name
This name is used to identify the projector in Web Control. You
can enter up to 15 single-byte alphanumeric characters. The only
symbols you can use are - (hyphen) and _ (underscore).
(However, the first character should be an alphabetical character,
and the last character should be an alphanumeric character.)
PJLink Password
Set a password to use when you access the projector using
compatible PJLink software.
You can enter up to 32 single-byte alphanumeric characters
(symbols cannot be used).
s "About PJLink" p.160
List of Functions
195
