Sub-menu Function
IP Address
You can input the
IP address
g
assigned to the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used. 0.0.0.0,
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask
You can input the
Subnet Mask
g
for the projector. You can enter
a number from 0 to 255 in each field of the address. However, the
following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Ad‐
dress
You can input the IP address for the gateway for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following
Gateway addresses
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
DNS server
By setting a mail server and host name, the DNS server allows you
to send emails of annotations created using the interactive
feature.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.9.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
When DHCP is set to On, DNS server information is acquired
using DHCP. At that time, these settings are given priority.
WINS server
By specifying a network folder as a save location, WINS server
allows you to save the annotation content created using the
interactive features. Set this when using WINS server and
specifying a network folder on a different subnet.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.9.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
If you do not use a WINS server, set 0.0.0.0.
When DHCP is set to On, WINS server information is acquired
using DHCP. At that time, these settings are given priority.
Sub-menu Function
IP Address Dis‐
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to Off.
Search Access Point Screen
Detected access points are displayed in a list.
Sub-menu Function
Refresh
Searches for the access point again.
Indicates an already set access point.
Indicates the access points where security is set.
If you select an access point where security has not been set, the
Wireless LAN menu is displayed.
If you select an access point where security has been set, the
Security menu is displayed. Select a type of security according to
the security settings for the access point.
List of Functions
191
