Settings Menu
Sub-menu Function
Keystone
You can correct keystone distortion.
• When H/V-Keystone is selected:
Adjust V-Keystone and H-Keystone to correct horizontal
and vertical keystone distortion.
• When Quick Corner is selected:
Select and correct the four corners of the projected image.
s "Quick Corner" p.60
Split Screen
Changes to split screen projection.
s "Projecting Two Images Simultaneously (Split Screen)"
p.128
Zoom
Adjusts the projected image size.
Image Shift
You can adjust the position of the image without moving the
projector.
s "Adjusting the Position of the Image (Image Shift)" p.62
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s "Restricting Operation (Control Panel Lock)" p.151
Sub-menu Function
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s
"Pointer Function (Pointer)" p.142
Volume
(This item cannot be set when the source is Whiteboard.)
You can adjust the volume. Setting values are saved for each
source.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to Off, you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control for
at least 15 seconds to reset the setting to its default value.
User Button
You can select the item in the Configuration menu to be assigned
to the [User] button on the remote control. By pressing
the [User] button the assigned menu item selection/adjustment
screen is displayed, allowing you to make one-touch settings/
adjustments. You can assign one of the following items to
the [User] button.
Power Consumption, Info, Progressive, Test Pattern,
Resolution, Pattern Display, Auto Calibration
List of Functions
178
