3 - 33
INSP
ADJ
DRIVE CHAIN INSPECTION
5. Check:
• Drive chain stiffness a
Clean and oil the drive chain and hold as
illustrated.
Stiff → Replace the drive chain.
6. Install:
• Chain joint 1
• O-ring 2
• Drive chain 3
N
OTE:
When installing the drive chain, apply the lith-
ium soap base grease on the chain joint and
O-rings.
New
7. Install:
• Link plate 4
N
OTE:
• Press the link plate onto the chain joint using
a drive chain riveter 5.
• Rivet the end of the chain joint using a drive
chain riveter.
• After riveting the chain joint, make sure its
movement is smooth.
New
8. Lubricate:
• Drive chain
Drive chain lubricant:
SAE 10W-30 motor oil or
suitable chain lubricants