Filter
Top Products
4 - 84
ENG
AC MAGNETO AND STARTER CLUTCH
5. Install:
• Plain washer 1
•Bearing 2
• Starter clutch drive gear 3
• Starter clutch 4
N
OTE:
Apply the engine oil on the plain washer, bear-
ing and starter clutch drive gear inner circum-
ference.
1
2
3
4
E
6. Install:
• Woodruff key 1
•Rotor 2
N
OTE:
• Clean the tapered portions of the crankshaft
and rotor.
• When installing the woodruff key, make sure
that its flat surface a is in parallel with the
crankshaft center line b.
• When installing the rotor, align the keyway c
of the rotor with the woodruff key.
7. Install:
• Bolt (starter clutch) 1
• Plain washer (rotor)
• Nut (rotor) 2
T
R
.
.
16 Nm (1.6 m · kg, 11 ft · lb)
T
R
.
.
70 Nm (7.0 m · kg, 50 ft · lb)
2
1
8. Install:
• Dowel pin
• Gasket [crankcase cover (left)]
• Crankcase cover (left) 1
• Bolt [crankcase cover (left)] 2
• Bolt [crankcase cover (left)] 3
N
OTE:
Tighten the bolts in stage, using a crisscross
pattern.
T
R
.
.
10 Nm (1.0 m · kg, 7.2 ft · lb)
T
R
.
.
12 Nm (1.2 m · kg, 8.7 ft · lb)
3
2
3
2
1
New