Filter
Top Products
5 - 21
CHAS
FRONT BRAKE AND REAR BRAKE
3. Install:
• Spring 1
To brake master cylinder piston 2.
N
OTE:
Install the spring at the smaller dia. side.
È
Front
É
Rear
ÈÉ
4. Install:
[Front]
• Brake master cylinder kit 1
• Washer 2
• Circlip 3
• Brake master cylinder boot 4
To brake master cylinder 5.
[Rear]
• Brake master cylinder kit 1
• Push rod 2
• Circlip 3
• Brake master cylinder boot 4
To brake master cylinder 5.
N
OTE:
• Apply the brake fluid on the brake master cyl-
inder kit.
• Apply the lithium soap base grease on the tip
of the push rod.
• When installing the circlip, use a long nose
circlip pliers.
È
Front
É
Rear
Front brake master cylinder
1. Install:
• Brake master cylinder 1
• Brake master cylinder bracket 2
• Bolt (brake master cylinder bracket) 3
N
OTE:
• Install the bracket so that the arrow mark
a
face upward.
• First tighten the bolts on the upper side of the
brake master cylinder bracket, and then
tighten the bolts on the lower side.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
È
É