Filter
Top Products
5 - 38
CHAS
FRONT FORK
26. Tighten:
• Front fork cap bolt (locknut) 1
N
OTE:
• While compressing the fork spring, set the
thin type spanners 2 between the spacer 3
and spring guide 4.
• Hold the locknut 5 and tighten the front fork
cap bolt with specified torque.
T
R
.
.
29 Nm (2.9 m · kg, 21 ft · lb)
27. Install:
• Front fork cap bolt 1
To outer tube.
N
OTE:
Temporarily tighten the cap bolt.
28. Install:
• Protector guide 1
Installation
1. Install:
• Front fork 1
N
OTE:
• Temporarily tighten the pinch bolts (lower
bracket).
• Do not tighten the pinch bolts (upper bracket)
yet.
2. Tighten:
• Front fork cap bolt 1
3. Adjust:
• Front fork top end a
* For AUS, NZ and ZA
T
R
.
.
30 Nm (3.0 m · kg, 22 ft · lb)
Front fork top end (standard)
a
:
5 mm (0.20 in)
* 10 mm (0.39 in)