Filter
Top Products
5 - 50
CHAS
STEERING
4. Install:
• Washer 1
• Steering ring nut 2
Tighten the steering ring nut using the
steering nut wrench 3.
Refer to “STEERING HEAD INSPEC-
TION AND ADJUSTMENT” section in the
CHAPTER 3.
T
R
.
.
7 Nm (0.7 m · kg, 5.1 ft · lb)
5. Check the steering stem by turning it lock
to lock. If there is any binding, remove the
steering stem assembly and inspect the
steering bearings.
6. Install:
• Washer 1
7. Install:
• Front fork 1
• Upper bracket 2
• Main switch 3
• Coupler bracket 4
• Front brake hose guide bracket 5
N
OTE:
• Install the coupler bracket on the outside of
the front brake hose guide bracket.
• Temporarily tighten the pinch bolts (lower
bracket).
• Do not tighten the pinch bolts (upper bracket)
yet.