Filter
Top Products
E 70 E 71
To be able to transfer the recorded training information via SonicLink™
and to analyse it with PC Coach Light software version 3.0 or later, you
need a personal computer with a sound card and microphone. To make
sure that the training information transfer will be successful, check that
there are no interfering sounds near the computer.
1. Start the software.
2. Activate the download function of the software.
3. If the receiver is in the Time of day display scroll up or down until
CONNECT is displayed. Make sure that start is displayed.
4. Bring and hold the back cover of the receiver next to the computer’s
microphone. Keep the back cover of the wrist receiver within 5 cm/ 2"
of the microphone until the SonicLink sound has ceased.
5. Press the OK button to start the data transfer. SonicLink and COM
appear on the display. You will hear a chirping sound (SonicLink) while
the training information is transferred to the computer. You can
monitor the transfer percentage from the receiver’s display. The receiver
returns to the Time of day display after data transfer.
Interrupt the data transfer to the computer by pressing the stop
button during data transfer. CONNECT is displayed.
Uploading Settings from Computer
Polar S510 offers you the option of uploading your settings with PC Coach
Light software version 3.0 or later to the wrist receiver. You are also able to
set a user ID for easier recognition in multi-user situations.
To be able to upload the settings from PC Coach Light software
via Polar Uplink, you need a personal computer with a sound card
(compatible with Sound Blaster™) and dynamic loudspeakers or
earphones.
1. Start the software.
2. If the receiver is in the Time of day display scroll up or down until
CONNECT is displayed.
3. Place the receiver less than 10 cm/ 4" from the loudspeaker.
4. Activate the upload function of the software. Do not move the receiver
during the data transfer.
5. The receiver automatically starts to upload the information as UpLink
and COM appear and you will hear a chirping sound while information
is transferred to the receiver. The receiver returns to the Time of day
display after data transfer.
Manual S510 GBR C.pm6 8.3.2001, 12:4470-71