Filter
Top Products
B
39B 38
Options
Monitor Set
Sound Units Help
On/OFF
1/2
On/OFF
Monitor settings
1. In the Time of day display
scroll up or down until
OPTIONS is displayed.
2. Press OK to enter
the Options mode.
EXERCISE SET
is displayed.
3. Scroll up or down until MONITOR SET is displayed.
4. Press OK to start the monitor settings. Sound is displayed.
Turning activity/button sound on/off
If you start from the Time of day display, repeat steps 1-4.
5. Press OK to start setting the sound. On/OFF starts to flash.
6. Scroll up or down to set sound on or off. Press OK.
Activity/button sound consists of the button sound and in the Measure and
Exercise modes the following activity sounds: start, stop and lap recording,
phase start, interval phase end and recovery calculation end sounds. Does
not consist of heart rate zone alarms, watch alarm or fitness test alarm.
Selecting measuring units
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Units is displayed.
6. Press OK to start setting the units. 1 or 2 starts to flash.
7. Scroll up or down to select the desired unit. Press OK.
The units settings affect the following features:
Units 1: Units 2:
User information kg, cm lbs, feet
Date of birth day-month-year month-day-year
Speed km/h mph
Distance km, hundreds of metres miles, feet
Wheel size mm mm (NOTE!)
Turning Help on/off
If you start from the Time of day display, repeat steps 1-4.
5. Scroll up or down until Help is displayed.
6. Press OK to start setting the Help function. On/OFF starts to flash.
7. Scroll up or down to set the Help on or off. Press OK.
If you turn Help on, the flashing arrows guide you to use the correct
buttons in the Options and File modes. During the exercise, when you are
changing the middle row information, you can see the name of the
function for few seconds.
To continue your settings, press the stop button or to return to the Time of
day display, press and hold the stop button.
Manual S510 GBR C.pm6 8.3.2001, 12:4438-39