1.
Using a coin, open the battery cover by turning it counterclockwise to OPEN.
2.
Insert the battery (CR2025) inside the cover with the positive (+) side against the
cover. Make sure the sealing ring is in the groove to ensure water resistance.
3.
Press the cover back into the connector.
4.
Use the coin to turn the cover clockwise to CLOSE.
Danger of explosion if the battery is replaced with wrong type.
S1 foot pod
See the instructions in the S1 foot pod user manual.
G1 GPS sensor
See the instructions in the G1 GPS sensor user manual.
ENGLISH
38 Important Information