Filter
Top Products
STEP 37
¯ Assemble txvo 4-1/2" PULLEYS (43) to txvo 2 X %1/4" PLATES
(33 )using two 3/8 X 2-1/4" BOLTS (86) four 3/8" WASHERS (91),
and tnvo 3/8" LOCK NUTS (92) as shown in HGURE 37.
FIGURE 37
FIGURE 38
STEP 38
¯ To assemble the PRESS CABLE (100) follow the cable routing as shown and use the following steps:
¯
Route the PRESS CA_BLE (100) armmd pulleys and L-brackets as shown in FIGURE 38.
2
3 4
[ 5
"
34
6