Filter
Top Products
FIGURE 21
3/8 X 2-3/4"
STEP 21
¯ SECURELY attach one 4-1/2" PULLEY(43) to the COUNTERLEVER (3) using one 3/8 X 2-3/4" BOLT (85), two 3/8" FLANGE SPACERS
(49) and one 3/8" LOCK NIYl" (92). See FIGURE
¯
SECURELY attach two 1 X 1" GLIDES (53) to the UNDERSIDE of the COUNTERLEVER (3) as showrt in FIGURE
¯
Insert txvo 3/4" FLANGE BEAREqGS (76) into the COUNTER LEVER (3) as shm~z~in FIGURE
¯ Hold the COUNTER LEVER (3) between the REAR (4) and h/fiDDLE UPRIGHTS (8) and slide the 3/4 DL~ X 11"" SHAUI" (107i throu_~ht
the MJDDLE UPRIGHT (8), COUNTER LEVER (3), and through the collar on the REAR UPRIGHT (4). To SE CURE the SHAFT (1073
place, insert two 5/16" SET SCREWS (48) into the collars on the UPRIGHTS and tighten. See FIGURE 21.
20