Filter
Top Products
STEP 18
¯ Assemble two ROLLER PADS (37) to the PEC SEAT (5) using two STARLOCK COLLARS (50). See FIGLrKE
¯ Pull back the SPRINGPIN (51) on the FRONT LrpRIGHT (25) and insert the PEC SEAT (5) down to the desired height. Release
SPRING PIN (51 ) and allow it to engage into the adjusm~ent holes. Use the 3-PRONG KNOB (61 ) to tighten the PEC SEAT (5)
place. See FIGURE 18.
I 1/2
I 1/2
1 1/2 I 1/2
1 1/2
I 1/2 I