Filter
Top Products
FIGURE 42
39
DETAIL 42
STEP 42
Securely assemble the ball end of the ~a23 CABLE (103) and one 3-112" PULLEY (42) to the FRONT UPRIGHT (25) using two 3/8
3/4" B6LTS (85), two 3/8" FLANGE SPACERS (49), two 3/8" WASHERS (91), and V,vo 3/8" LOCKNUTS (921). (NOTE:
CABLE (103) should be routed underneath the retaining bolt as shown in DETAIL 42.)
FIGURE 43
STEP 43
¯ Runthe AB CABLE (103) throughthe
floating pulley assembl?; then screw the
threaded end of AB CABLE (103) approxi-
mately 3/4 into the end of the PULLEY
BRACKET (29) eaad tightenjamnut
securely as shown in FIGLrRE 43.
IMPORTA2qT! lvi’ake sure the cables are
running in the grooves of all pulleys.
37