Filter
Top Products
44
GENERAL
USER ENGINEERING MODE
(SIMPLE Only, Continued)
UNITS
P6 represents units, Metric or English. You can change this configuration
for your Treadmill. When you enter P6, the large window shows the model
number and the small window shows the units. An even number represents
English units (miles/mph), and an odd number represents Metric units
(kilometers/kph). You can change the number using either set of arrow
keys. Press and hold SELECT to save the data.
MAXIMUM TIME
P7 represents the maximum time the treadmill can be used (shown as
minutes:seconds). Use the arrow keys to change the time. To save the time,
hold down the SELECT button until there are two beeps.
DEFAULT WEIGHT
P8 represents the default weight. You can change this configuration for
your treadmill. To modify the weight, press the arrow keys. To save the
new default weight, hold down the SELECT button until there are two
beeps
ACCUMULATED TIME
P9 represents accumulated time in hours. This information is for viewing
only; the data can not be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, either in miles or kilometers. This
information is for viewing only; the data can not be modified.
PAUSE TIME
P14 represents the pause time. The default pause time is 5 minutes. You
can modify the pause time from 20 seconds to 10 minutes. You can
modify this time by using the SPEED or ELEVATION arrows. Press and hold
SELECT to save the new value.