Filter
Top Products
41
GENERAL
USER ENGINEERING MODE
(DELUXE Only)
Your treadmill offers a User Engineering Mode that can access certain data
and help to troubleshoot your treadmill. User Engineering Mode is designed
for you to access functions that will not affect important treadmill settings. To
access this mode please hold down SPEED DOWN and SELECT for 5
seconds while the treadmill is in any state of setting up a program. When in
the User mode, "USEr" is displayed. To access the data press the SPEED and
ELEVATION keys to scroll through the available data/functions. To select the
data/function, press SELECT. To exit, press STOP. The units screen will
appear when entering user engineering. If the units are correct press STOP.
UNITS
P6 represents units, English or Metric. You can select this configuration for
your Treadmill.
MI or KM appears in the dot matrix. If it is “MI”, the Treadmill is
configured in English units (miles/mph); “KM” represents a Metric
configuration (kilometers/kph). Press the SPEED arrows to toggle between
English and Metric.
In order to save the modified value, press and hold SELECT. Note that
changing units does affect the stored value of weight and clears any stored
user programs. Changing units may also require you to perform
auto-calibration.
MAX TIME
P7 represents the maximum time, which is displayed in the upper right
window. This is the maximum amount of time the Treadmill will display. You
can modify this time by using the SPEED or ELEVATION arrows. Press
SELECT to save the new value.
DEFAULT WEIGHT
P8 represents default weight. Weight appears in the upper left window.
To modify weight, press the SPEED arrows. To save the new default
weight, press and hold SELECT prior to exiting. If Units is modified
immediately prior, weight defaults to 150 lbs. or 68 kg.