Filter
Top Products
COMMERCIAL PRODUCTS DIVISION
iv
The C964i or C962i treadmill must be grounded. If it should malfunction or break
down, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. The treadmill is equipped with a cord having an
equipment-grounding conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances. If you do not follow these
Grounding Instructions
, you could void the Precor limited warranty.
DANGER
Improper connection of the equipment-grounding conductor can result in a risk
of electric shock. Check with a qualified electrician or serviceman if you are in
doubt as to whether the treadmill is properly grounded. Do not modify the plug
provided with the treadmill—if it will not fit the outlet, have a proper outlet installed
by a qualified technician.
120V UNITS DESIGNATED FOR U.S. MARKETS
The C964i or C962i treadmill is for use on a nominal 120-volt circuit and has a
grounding plug that looks like the plug as illustrated in Diagram A. Make sure that
the treadmill is connected to an outlet having the same configuration as the plug.
No adapter should be used with this product.
Grounding Instructions
Diagram A
Proper grounding plug and
power outlet for 120 volt.
240V UNITS DESIGNATED FOR U.S. MARKETS
The C964i or C962i is for use on a circuit having a nominal rating more than 120
volts and is factory-equipped with a specific power supply cord to permit
connection to a proper electric circuit. Make sure that the C964i or C962i is
connected to an outlet having the same configuration as the plug. No adapter
should be used with this product. If the C964i or C962i must be reconnected for
use on a different type of electrical circuit, the reconnection should be made by
qualified service personnel.