Filter
Top Products
page 32
COMMERCIAL PRODUCTS DIVISION
KEYS ON THE DISPLAY CONSOLE
The Precor treadmills have an easy-to-use keypad that is activated by the slightest
touch. Remind users that they only need to apply gentle pressure to the keypad.
Each key on the keypad provides specific functions. Numeric keys (numbered 1 - 0)
let you enter data in answer to the display prompts and change the speed or
incline during a workout. The standard keys, CHANGE, RESET, INCLINE ▲▼,
SPEED ▼▲, and ENTER, let you enter data as well as control your workout.
The following information explains the different uses of the keys from left to right.
To locate each key, look at the display console or refer to Diagram 22.
Diagram 22
Display console keypad.
Numeric keys: Indicate program #,
time limit, or goal entries. During a
workout, use these keys to select a
target speed or incline.
Note: The CHANGE keys are not shown in this diagram. Refer to Diagram 22 for
its location.
QUICKSTART
: Bypasses the remaining
setup prompts and starts moving the
running belt. SmartRate is inactive and
default values apply.
KEYPAD TIPS
• Select accurate entries or features such as SmartRate will not work properly.
• Answer the setup prompts by pressing the numeric keys or the ▼ or ▲ keys.
• Press ENTER to select the information being displayed.
• QUICKSTART bypasses further selections and causes the running belt to
start moving. Default values apply (see QUICKSTART on page 34). The
SmartRate display does not appear.
• A time-out occurs during the setup prompts if the treadmill detects no key
presses for five seconds. Prompts appear requesting that the user press the
arrow or number keys. If no key presses occur within the next two minutes,
the display returns to the Precor banner.
• Press RESET to return to the Precor banner.
• The STOP button does not appear in Diagram 22, but its function is vital as
explained in this section.