Filter
Top Products
page 28
COMMERCIAL PRODUCTS DIVISION
USING CSAFE STANDARD EQUIPMENT
The C956i and C954i are fully compatible with CSAFE protocols. If the unit is
connected to a CSAFE master device, the user will be prompted to enter a user ID. Five
zeros appear on the display. The left zero blinks to indicate that it is awaiting input. The
following table provides information about the keypad functions:
User ID Entry: Program Keys
SPEED ▼ or ▲ moves the blinking LED from field to field.
INCLINE ▲ or ▼ changes the number value in the selected field.
Number keypad use the number keys to enter a user ID. The number that is
pressed appears in the display and the next field begins to
blink. When all five user ID numbers are selected, the user
must press ENTER to submit it.
ENTER submits the displayed user ID. User ID entry is bypassed
when “00000” is displayed and the user presses ENTER.
The Program prompt appears.
RESET resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device.
Then, the program prompt is displayed. See
Quick Steps to Working Out
.