Filter
Top Products
page 27
COMMERCIAL PRODUCTS DIVISION
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION AND ERROR LOG
The treadmill stores the cumulative miles or kilometers, the number of hours that
the unit has been in use, the software version and software type (which is valuable
when calling customer support), and an error log (useful when troubleshooting).
1. Start at the Precor banner.
2. Press the STOP button and, without pause, press the following numbers:
6, 5
The field name ODOMETER appears briefly and then the odometer value (the
cumulative distance users have travelled) appears in miles or kilometers.
Press ENTER and the number of hours (HOUR METER) that the unit has been in
use appears. The treadmill notes the passing of each 10th of an hour, but the
numeric value that appears is truncated to the nearest full hour.
Press ENTER again and the unit’s three digit SOFTWARE VERSION (upper and
lower) appears on the display.
Press ENTER once again and the ERROR LOG appears. Press any ▼ or ▲ key to
view the error messages.
Note: To clear (delete) the error log, press QUICKSTART for at least four
seconds while viewing the list. Prompts appear on the display and let you know
when the error messages have been deleted (“cleared” from memory).
Important: You cannot retrieve the error log once you have deleted it.
To view the serial number, press ENTER. Write the serial number onto the
warranty registration form and in the space provided on page 8. The serial
number is helpful should you ever need to contact Customer Support.
To return to the Precor banner, press ENTER, STOP, or RESET.