Filter
Top Products
Connecting/Disconnecting Patient Cables
M3500B HeartStart XLT Defibrillator/Monitor 10-5
10
Connecting the SpO
2
Patient Cable
To connect the SpO
2
patient cable:
1. Hold the connector with the flat side up, as shown in Figure 10-4.
2. Insert the connector into the receptacle and push until the blue portion of
the connector is no longer visible.
Figure 10-4 Connecting the SpO
2
Patient Cable
Disconnecting the SpO
2
Patient Cable
To disconnect the SpO
2
patient cable, gently pull it out of the SpO
2
connector.