Filter
Top Products
FIGURE 32
STEP 32
¯ Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on LEVER STOP (12) as shown in FIGURE
(NOTE: The bolt holding pulley and cable retaining clip may need to be loosened to align cable retaining dip with cable.)
¯ Route ball end of LEG EXT. CABLE (90) under pulley and cable retaining clip on PRESS ARM LEVER (9). (NOTE: The
holding pulley and cable retaining dip may need to be loosened to align cable retaining clip with eabl,~..)
STEP 33
¯
After routing ball end of LEG EXT. CABLE
(90) through SWIVEL PULLEY BRACKET
(23), attach two 3-I/2" PULLEYS (79) using
two 3/8" X 2" BOLTS (37) and two 3/8" LOCK-
NUTS (48). See FIGURE 33.
3/8 X 2"
6
23