Filter
Top Products
FIGURE 36
3/8 X 2-3/4" (.’~
DETAIL 36
STEP 36
¯ Securely assemble the ball end of the AB CABLE (91) and one 3-1/2" PULLEY (79) to the FRONT UPRIGHT (11) using two
X 2-3/4" BOLTS (38), two 3/8" FLANGE SPACERS (66), two 3/8" WASHERS (51), and two 3/8" LOC].~qU-TS ~48).
The AB CABLE (91) should be routed underneath the retaing bolt as shown in DETAIL 36.)
FIGURE 37
STEP 37
Route threaded end of AB CABLE (91) around 3-1/2"
PULLEY (79) while assembling one 3-1/2" PULLEY
(79) to the louver FLOATING PULLEY BRACKET (22)
using one 3/8 X 1-3/4" BOLT (36) and one 3/8" LOCK-
NUT (48) as shown in FIGURE 37.
1/2
I
1/2
I
3
25
1/2
, I
4 5 6