Filter
Top Products
ENG-51
Setup mode
Continue
Pressing the
5.
MENU button confirms the change, and returns
to the Setup mode “ALARM”.
Press the MENU button repeatedly to switch to another mode.
To the mode top/switch the mode :
MENU
Setting the tire circumference TIRE
Set the tire circumference (peripheral length) to SP1 (Speed sensor 1) and SP2 (Speed
sensor 2) synchronized according to “Searching for sensor ID” (page 52).
For the tire circumference, see “Tire circumference” (page 16).*
Press and hold the * MODE1 or MODE2 button to increase/decrease the number
quickly.
1.
Press and hold the MENU button in the Clock mode or Sports
mode until “SETUP MENU” appears on the screen.
It switches to “CLOCK DATE” automatically.
Switch modes :
MENU
(press & hold)
2.
Switch to “TIRE” pressing the MODE1 or MODE2 button, and
then confirm it pressing the SSS button.
Switch screen :
MODE2
MODE1
(or)
Confirm :
SSS
3.
Select (Sensor 1) or (Sensor 2) by pressing the MODE1
or MODE2 button.
↔
:
MODE2
MODE1
(or)
Confirm :
SSS
When using a wristwatch for a single bicycle, set the tire *
circumference to
(Sensor 1) only. When using a wrist-
watch commonly for two bicycles, sets the tire circumference
of the second bicycle to
(Sensor 2).
Sensor currently
selected
Tire circumference
set to the sensor
currently selected