CONTROL MODULE PIN OUT INFORMATION
BODY PROCESSOR MODULE
0 Pin
Description
lGNlT,ON SwlTCHED GROUND
SEAT HEATER STATUS iLHD = PASSENGER, RHD = DRIVER)
IGNITION SWITCHED GROUND
SEAT HEATER REOUEST (LHD = PASSENGER. RHD = DRiVERi
STARTER ENGAGE REOUEST
SEAT HEATER STATUS iLHD = DRIVER. RHD = PASSENGER,
BATTERY SUPPLY VOLTAGE
SCP NETWORK
SCP NETWORK
SEAT HEATER REOUEST iLHD = DRIVER, RHO = PASSENGER,
DRIVER DOOR CONTROL MODULE
v Pin
Description
I DD10-1
BA”ERY POWER SUPPLY
Inactive
Bt
B+
B+
Bc
B+
B+
B+
COMPONENTS
Component
Connector I Type I Color
Location I Access
BODY PROCESSOR MODULE
DOOR CONTROL MODULE- DRIVER
DOOR CONTROL MODULE- DRIVER REAR
,NSTR”MENT PACK
FC,S,14-WAYAMPEEECIGREY
DDlO, 22.WAY FORD 2.8 TIMER, BLUE
DD, ,,22-WAY FORD 2.8 TIMER, BLACK
RDlO, 22.WAY FORD 2.8 TIMER, BLUE
RD, I, 22~WAY FORD 2.8 TMER , BLACK
FC24!48-WAY AMP MODULE PC9 SIGNAL, BLACK
FC25,24-WAY AMP MODULE PC9 SIGNAL, BLACK
BULKHEAD, BEHIND GLOVE BOX
DOOR CASING, TRIM PANEL
DOOR CASING, TRIM PANEL
FASCIA
Active
GROUND
GROUND
GROUND
GROUND IMOMENTARY)
GROUND ,CRANKINGl
GROUND
B-
2- 1800 HZ
2- ,800 HZ
GROUND iMOMENTARYl
B+
MEMORY SWITCHES
(DRIVER DOOR SWITCH PACKI
SEAT CONTROL MODULE - DRI”ER
DD, , IS-WAY MOS-29, YELLOW
Sk,,-D, ,&WAY FORD 2 8 TiMER i BLACK
SMP-D ,26-WAY FORD IDC, BLACK
SW-D, ,&WAY FORD 2 8 TIMER, BLACK
DOOR TRiM PANEL
DRlVER SEAT, UNDER
Active
B-
GROUND
2- ,600 HZ
2- 1800 HZ
GROUND (LED ONi
Inactive
B+
GROUND
SEAT CUSHlON HEATERS - DRIVER
SEAT HEATER SWITCH
(CENTER CONSOLE SWITCH PACK1
SEAT LUMBAR PUMP-DRIVER
SEAT MOTORS - DRIVER
SEAT SOUAB HEATERS - DRIVER
SWlTCH PACK - DRIVER SEAT
SM7-D , SWAY MULTILOCK 070, YELLOW
DRIVER SEAT
cc,, 16.WAY FORD IDC S.” , BLACK
SM10-D, O-WAY MULTILOCK 070 /YELLOW
DRIVER SEAT
SMl~D, B-WAY MULTILOCK 070, GREY
DRlVER SEAT, UNDER
SMG-D, B-WAY MULTlLOCK 070, YELLOW
SM, ,~D, B-WAY MULTlLOCK 070, WHlTE
SM,2-D, B-WAY MULTlLOCK 070, WHlTE
SM,B-D , S-WAY MULTiLOCK 070, YELLOW
349-D , J-WAY MULTILOCK 070, GREY
DRIVER SEAT
SM%D, 18.WAY MULTlLOCK 040, BLACK
DRIVER SEAT
I DD10-8
LOGIC GROUND
S DD,O-9
SCP NETWORK
S
DDIO-16
SCP NETWORK
0 DDll-2
SEAT MEMORY STATUS LED
DRIVER REAR DOOR CONTROL MODULE
77 Pin
Description
BAVERY POWER SUPPLY
LOGIC GROUND
SCP NETWORK
B+
Active
B+
Inactive
Bt
GROUND
GROUND
2- ,600 Hz
2 - ,600 Hz
RELAYS
Relay
Case Color
Connector I Color
Location / Access
SEAT HEATER RELAY DRIVER
BROWN
SM14-D/BROWN
FRONT SEAT RELAYS, UNDER SEAT
S RD10-16
SCP NE7WORK
I RD,O-19
MODULE IDENTIFICAT,ON
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
/ RDll-5
MEMORY 1
I RD11~7
MODULE IDENTIFICATION
/ RDll-13
MEMORY SET
I RDll-15
MEMORY 3
I RD11~22
MEMORY 2
B+
GROUND
B+
B+
B+
HARNESS-TO-HARNESS CONNECTORS
Connector
CA8
CA10
CA13
CA14
CA23
FC1
FC5
FC7
Type / Color
*O-WAY MULTILOCK 070, WHITE
B-WAY MULTILOCK 070, YELLOW
S-WAY MULTlLOCK 070, WHITE
B-WAY MULTlLOCK 070, WHITE
I(1-WAY MULTILOCK 070, WHITE
W-WAY THROUGH PANEL CONNECTOR, BLACK
54.WAY THROUGH PANEL CONNECTOR/BLACK
2%WAY MULTILOCK 070, WHITE
Location / Access
DRlVER ‘I’ POST, DOOR HARNESS GAITER
DRIVER ‘A’ POST, DOOR HARNESS GAITER
DR,“ER ‘B,c’ POST, DOOR HARNESS GAITER
DRIVER ‘Bit’ POST, DOOR HARNESS GAITER
BELOW DRIVER SEAT
BELOW PASSENGER SlDE AIR “ENT, GLOVE BOX ASSEMBLY
BELOW DRIVER SIDE AIR VENT, COIN TRAY
ABOVE DIMMER MODULE, COIN TRAY
DRIVER SEAT CONTROL MODULE
v Pin
Description
0 SM,-,D
0 SM1~2D
0 SMMD
0 SM,-40
0 SM,-SD
0 SM,-8D
0 SMI-7D
0 SMMD
I SM,-SD
I SMI-IOD
I SMI-IlD
I SM,-lZD
I SM,-732
I SMI-l4D
/ SMI-15D
I SMl-18D
DRIVER SEAT SOUAB FORE, AFT RECLINE MOTOR SUPPLY
DRIVER SEAT SOUAB FORE, AFT RECLINE MOTOR SUPPLY
DRl”ER SEAT CUSHION RAlSE, LOWER FRONT MOTOR SUPPLY
DRIVER SEAT CUSHION RAISE, LOWER FRONT MOTOR SUPPLY
DRl”ER HEADREST RAlSE , LOWER MOTOR SUPPLY
DRIVER HEADREST RAlSE, LOWER MOTOR SUPPLY
DRIVER SEAT CUSHlON FORE /AFT MOTOR SUPPLY
DRIVER SEAT CUSHlON FORE /AFT MOTOR SUPPLY
DRIVER SEAT CUSHION FORE MOVEMENT REQUEST
DRIVER SEAT CUSHION AFT MOVEMENT REOUEST
DRIVER SEAT C”SH,ON LOWER REAR MOVEMENT REOUEST
DRIVER SEAT CUSHiON RAiSE REAR MOVEMENT REOUEST
DRIVER SEAT CUSHION RAISE FRONT MOVEMENT REOUEST
DRIVER SEAT CUSHION LOWER FRONT MOVEMENT REOUES,
DRIVER SEAT SOUAB AFT RECLINE MOVEMENT REOUEST
DRIVER SEAT SOUAB FORE RECLINE MOVEMENT REQUEST
0 SMCID
DRIVER SEAT CUSHION RE*R, SOUAB RECLINE MOTOR POT REF. GROUND
0 SM2-2D
DRIVER SEAT CUSHION FORE, AFT MOTOR POT. REFERENCE GROUND
0 SM2-SD
DRIVER SEAT CUSHION REAR, SOUAB RECLINE MOTOR POT. REF. VOLTAGE
0 SM2-8D
DRIVER SEAT CUSHION FRONT MOTOR POT. REFERENCE VOLTAGE
I SM2-8D
DRIVER SEAT HEADREST MOTOR POTENTIOMETER FEEDBACK
1 SM2-9D
DRl”ER SEAT CUSHlON FRONT MOTOR POTENTlOMETER FEEDBACK
I SMZ-1OD
DRIVER SEAT CUSHION REAR MOTOR POTENTIOMETER FEEDBACK
I SMZ-l,D
DRIVER SEAT SOUAB RECLINE MOTOR POTENTIOMETER FEEDBACK
I SMZ-12D
DRIVER SEAT CUSHlON FORE, AFT MOTOR POTENTIOMETER FEEDBACK
0 SM2-l4D
DRIVER SEAT HEADREST MOTOR POTENTIOMETER REFERENCE GROUND
0
SM2-l5D
DRi”ER SEAT CUSHION FRONT MOTOR POTENTIOMETER REFERENCE GROUND
0
SM2-,813
DRl”ER SEAT C”SHlON FORE, A” MOTOR POT. REFERENCE VOLTAGE
0 SM2-l9D
DRIVER SEAT HEADREST MOTOR POTENTIOMETER REFERENCE VOLTAGE
I SMB-1D
I SMB-2D
0
SM3-3D
0
SM3-4D
I SM3-5D
/ SM3-8D
I SM3-8D
S
SM3-9D
S
SM3-lOD
MODULE lDENTlFlCAT,ON
POWER GROUND
DRIVER SEAT RAISE, LOWER MOTOR SUPPLY
DRIVER SEAT RAISE, LOWER MOTOR SUPPLY
BATTERY POWER SUPPLY
DRIVER SEAT HEADREST RAISE MOVEMENT REQUEST
DRIVER SEAT HEADREST LOWER MOVEMENT REOUEST
SW NETWORK
SCP NETwORK
Active
B+
B+
B+
El+
B+
B+
B+
B+
B+
B+
B+
B+
B+
B+
*+
B+
Inactive
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUNDS
Ground
CA25L
CA25R
CA26L
CA26R
CA33L
CABSL
ccx
Location
I
Type
EYELET IPAIR) - PASSENGER SEAT GROUND STUD
EYELET IPAIR) - PASSENGER SEAT GROUND STUD
EYELET (PAIR, - DRIVER SEAT GROUND STUD
EYELET (PAIR, - DRIVER SEAT GROUND STUD
EYELET IPAIR, - RH ‘K POST GROUND SCREW
EYELET (PAIR) - LH ‘A’ POST GROUND SCREW
EYELET (PA,R) - RH FRONT BULKHEAD STUD, CABlN SIDE
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
GROUND
5”
,O”=“P,,V=DOWN
10”=UP,1”=DOWN
10V=“P,l”=DOWN
S”=FORE.ZV=AFT
2 V = FORE, 10 V = AFT
GROUND
GROUND
5”
5v
GROUND (DRIVER)
GROUND
B+
B+
Bc
Bt
B+
CONTROL MODULE PIN OUT INFORMATION (FOLD OUT PAGE)
GROUND
GROUND
GROUND
GROUND
GROUND
B+
GROUND
GROUND
INSTRUMENT PACK
c7 Pin
Description
S FC24-19
SCP NETWORK
S FC24-20
SCP NETwORK
C FC24-24
CAN NETWORK
C FC24-47
CAN NETWORK
Active
Inactive
NOTE: REFER TO THE APPENDIX AT THE REAR OF THIS BOOK FOR CAN AND SCP NETWORK MESSAGES.
The following symbols are used to represent values for Control Module Pin Out data:
I
Input
D
Serial and encoded communications B+ Battery voltage
KHz Frequency x 1000
0 output
C CAN (Network)
V Voltage (DC)
MS Milliseconds
SG Signal Ground
S SCP Network
Hz Frequency
MV Millivolts
CAUTION: The information on this data page is furnished to aid the user in understanding circuit operation. THIS INFORMATION SHOULD BE USED FOR REFERENCE ONLY.
NOTE: The values listed are approximately those that can be expected at the control module connector pins with all circuit connections made and all
components connected and fitted. “Active” means a load is applied or a switch is ON; “Inactive” means a load is not applied or a switch is OFF.
REFER TO THE FRONT OF THE BOOK FOR ILLUSTRATIONS DETAILING THE LOCATION AND IDENTIFICATION OF COMPONENTS, RELAYS.
CONNECTORS, HARNESSES, GROUNDS, VEHICLE CONTROL MODULES AND CONTROL MODULE PINS.
DATE OF ISSUE: SEPTEMBER 1997
