Filter
Top Products
22 Functional verification Welch Allyn Micropaq Monitor
Network status
The Network Status screen displays the current status of the monitor and its
communication channel.
RSSI Current RSSI (Received Signal Strength Indicator) value.
Displayed as a negative number. Indicates the strength (in
dBm) of the radio signal as seen by the associated access
point. The closer the value is to zero, the stronger the signal.
A value smaller than -65 dBm for the 5 GHz radio card or -60
dBm for the 2.4 GHz radio card indicates either:
• an area of poor or no radio coverage or
• a fault in the monitor or radio card
FIRMWARE VER Firmware version of the radio card
NETWORK NAME Radio card/monitor’s network name, same as SSID
MONITOR MAC Radio card/monitor’s MAC address
MONITOR IP Radio card/monitor’s IP address (possibly statically assigned)
AP MAC Associated access point’s MAC address
ACUITY IP Connected Acuity’s IP address
DHCP IP DHCP server’s IP address or N/A if static IP is used
NETMASK Radio card/monitor’s netmask setting (DHCP or static
assigned)
Network Status screen