Filter
Top Products
15
25. Wrap the Low Cable (55) over a 90mm Pulley
(46). Attach the Pulley and a Cable Trap (48) to
the
Top Frame (11) with an M10 x 92mm Bolt
(84), an M10 Washer (77), and an M10 Nylon
Locknut (80).
Make sure the Cable T
rap is
turned to hold the Cable in the groove of the
Pulley.
27. Wrap the Low Cable (55) over a 90mm Pulley
(46). Attach the Pulley to the Top Frame (11) with
an M10 x 45mm Bolt (61) and an M10 Nylon
Locknut (80).
28. Wrap the Low Cable (55) over a 90mm Pulley
(46). Attach the Pulley to the Top Frame (11) with
an M10 x 45mm Bolt (61) and an M10 Nylon
Locknut (80).
29.
Set a 50mm Washer (88) on the Weight Tube
(23).
Thread an M12 Nut (87) all the way onto the Low
Cable (55). Screw the Cable partway into the
W
eight
T
ube (23).
T
ighten the Nut against the
50mm Washer (88).
26. Wrap the Low Cable (55) under a 90mm Pulley
(46). Attach the Pulley to the indicated end of the
“U”-bracket (39) with an M10 x 45mm Bolt (61)
and an M10 Nylon Locknut (80).
25
26
27
28
29
80
48
84
46
77
11
55
61
55
46
80
39
61
46
55
80
11
61
80
11
46
55
55
23
88
87