Filter
Top Products
12
13. Press a 50mm Round Inner Cap (32) and a
50mm Round Butterfly Cap (89) into the Left
Butterfly
Arm (14). Press two 29mm Round Inner
Caps (33) into a Press Handle (25).
Wet the lower end of the Left Butterfly Arm (14)
with soapy water. Slide a Long Foam Pad (28)
onto the Butterfly Arm.
Attach the Press Handle (25) to the Left Butterfly
Arm (14) with an M10 x 65mm Button Head Bolt
(71), an 11mm Spacer (73), and an M10 Nylon
Locknut (80).
Repeat this step with the Right Butterfly Arm
(13).
15. Press two 50mm Round Inner Caps (32) into the
Leg Lever (15).
Lubricate an M10 x 77mm Bolt (75) with grease.
Attach the Leg Lever (15) to the Front Leg (7)
with the Bolt and an M10 Nylon Locknut (80). Do
not overtighten the Locknut; the Leg Lever
must be able to pivot easily
.
14. Lubricate the axles on the Butterfly Frame (12)
with grease.
Insert a Butterfly Arm Bushing (58) into the Left
Butterfly Arm (14). Slide the Butterfly Arm onto
the indicated axle on the Butterfly Frame (12).
Make sure the Butterfly Arm is behind the
bracket on the Butterfly Frame.
Attach the Left Butterfly Arm (14) to the Butterfly
Frame (12) with two 25mm Retainer Rings (79)
and a 25mm Round Cover Cap (52). Make sure
the teeth on the Retainer Rings are towards
the Cap, as shown in the inset drawing.
Repeat this step with the Right Butterfly Arm
(13).
32
14
13
28
89
80
73
33
25
33
71
Lubricate
Axle
13
79
52
52
12
58
14
79
32
32
7
Lubricate
80
75
15
13
14
15