Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
A.
Dial
Dial
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Refer to detail view A. Attach the FRONT STABILIZER(3), the shorter stabilizer with the non-adjustable
ENDCAPS(103, 104), to the front of the MAIN FRAME(1) with CARRIAGE BOLTS(M10x1.5x94mm)(44),
ARC WASHERS(M10)(61), LOCK WASHERS(M10)(67), and NYLOCK NUTS(M10x1.5)(69).
STEP 2
Attach the REAR STABILIZER(2) to the MAIN FRAME(1) with CARRIAGE BOLTS(M10x1.5x94mm)(44),
ARC WASHERS(M10)(61), LOCK WASHERS(M10)(67), and NYLOCK NUTS(M10x1.5)(69).
NOTE: You can turn the dials in the ADJUSTABLE ENDCAPS(81) which are attached to the REAR
STABILIZER(2) to keep the AVARI® Programmable Magnetic Elliptical stable.