Filter
Top Products
FUNCTION INSPECTION:
Visually inspect the AVARI® Programmable Magnetic Elliptical to verify that assembly is as shown in
the above illustration. Check the function of the AVARI® Programmable Magnetic Elliptical, stand on the
PEDAL CAPS(78, 79) and place your hands at a comfortable position on the HANDLEBARS(9, 10). Slowly
move the crank through one complete revolution to verify that the drive train functions properly. Use the UP/
DOWN dial and ENTER button on the COMPUTER(25) to select a program and verify that the Magnetic
System provides different tensions. Refer to the COMPUTER INSTRUCTIONS on pages 16 to 24.
CAUTION: Locate and read the WARNING LABEL(95) on the AVARI® Programmable Magnetic
Elliptical. Make sure that all users read the WARNING LABEL(95) before using the product.
SET UP INSTRUCTIONS
13
Equipment Mat
Place the AVARI® Programmable Magnetic Elliptical in the area where it will be used. It is recommended
that the AVARI® Programmable Magnetic Elliptical be placed on an equipment mat. The maximum
operation dimensions of the AVARI® Programmable Magnetic Elliptical are approximately 52.6 inches
long x 25.4 inches wide x 57 inches tall. (These dimensions may vary up to one inch.) Make sure that
adequate space is available for access to passage around and emergency dismount from the AVARI®
Programmable Magnetic Elliptical. A minimum of 20 inches on at least one side and 20 inches either
behind or in front of the AVARI® Programmable Magnetic Elliptical is required for safe operation.
LEVELING: Turn the dials in the ADJUSTABLE ENDCAPS(81) which are attached to the REAR
STABILIZER(2) so that the AVARI® Programmable Magnetic Elliptical sits on the oor
without rocking.
MOVING: The AVARI® Programmable Magnetic Elliptical has a pair of wheels built into the LEFT
and RIGHT ENDCAPS(103, 104) at the front. Grasp the STATIONARY HANDLEBAR(11)
and tip the AVARI® Programmable Magnetic Elliptical forward to move.
Dial
Dial