Filter
Top Products
ASSEMBLY INSTRUCTIONS
10
B.
STEP 7
There is a “R” decal on the RIGHT HANDLEBAR(9), and a “L” decal on the LEFT HANDLEBAR(10).
Refer to detail view B. Feed the plug end of the PULSE SENSOR WIRE(30) through the tube on the top
of the PIVOTING ARM(6). Insert the LEFT HANDLEBAR(10) into the PIVOTING ARM(6) and secure with
BUTTON HEAD BOLTS(M8x1.25x36mm)(50) and THIN NYLOCK NUTS(M8x1.25)(71). Connect the
PULSE SENSOR WIRE(30) to the PULSE CONNECTION WIRE(29) and push the plugs into the PIVOTING
ARM(6). Clip a GROMMET PLUG(32) onto the PULSE CONNECTION WIRE(29) and press the GROMMET
PLUG(32) into the hole in the PIVOTING ARM(6). Repeat on the right side.
STEP 8
Attach the STATIONARY HANDLEBAR(11) to the UPRIGHT(4) with BUTTON HEAD BOLTS(M8x1.25x25mm)
(53), LOCK WASHERS(M8)(68), and WASHERS(M8)(65).
L
R