Filter
Top Products
OPERATIONAL INSTRUCTIONS
15
EXERCISE WORKOUT
To start using the AVARI® Programmable Magnetic Elliptical simply stand on the foot pedals with the
front of your shoes close to the front edge of the pedal cap. Place your hands at a comfortable position on
the handlebars. Simply move your highest foot forward and follow the natural path of the machine.
Start on a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable,
start adjusting the load level to achieve the workout desired.
Forward and Reverse
The AVARI® Programmable Magnetic Elliptical can be used in the forward and reverse direction to vary
the muscles that you work out. This will also vary your workout, helping you to stay motivated. To change
directions, simply slow the pedals down until they stop, and switch directions.
Load Level Adjustment
The load level of AVARI® Programmable Magnetic Elliptical can be changed at any time during your
workout. Adjusting your load level will allow you to increase or decrease your intensity level.
PEDAL CAP ADJUSTMENT
The position of the PEDAL CAPS(78, 79) can be
adjusted by loosening the LOCKING KNOBS(77) and
adjust the PEDAL CAPS(78, 79) to the front or back.
Securely tighten the LOCKING KNOBS(77) after
adjustment. Always set the PEDAL CAPS(78, 79) at the
same position on both sides.
Start with the center position and adjust if necessary. Use
the back position if users are taller than average. Use
the front position if users are shorter than average. Find
the position which is most comfortable for your exercise.