Filter
Top Products
Shimano Dura-Ace CN-7701
Ultegra CN-HG92, 105
HG72,105 HG73
280 g 1473 mm
Shimano Sora CN-HG50 335 g 1473 mm
Campagnolo Record 2000, 10
Speed Chain
260 g 1473 mm
Campagnolo 10 Speed Chains
Chorus, Centaur
274 g 1473 mm
Campagnolo Veloce, Mirage, and
Xenon
277g 1473 mm
For precise readings, all settings must be as accurate as possible. Chain length and weight are directly
proportionate to power value. If there is 1% error, the power value will also have 1% error.
There is no need to re-enter chain length and weight if links are removed. The system uses chain density
(weight/length). Removing links from the chain does not affect density.
For further information on Power settings, consult the power sensor user manual.
Use Polar ProTrainer 5 software for Power settings.
*Optional sensor required.
Cadence*: On / Off
You can install an optional Polar Cadence Sensor onto your bicycle.
To activate the cadence sensor in your cycling computer, select Settings > Bike > Bike 1 > Cadence > On.
Teach new sensor? is displayed.
• If your sensor is already taught, select No.
• If your sensor has not been taught yet, see Using a New Accessory (page 55) for more information on
teaching.
User Settings
Enter accurate user information in the cycling computer to receive the correct feedback on your
performance.
To set user information in the cycling computer, select Settings > User
• Weight: To change units, press and hold LIGHT
• Height: To change units, press and hold LIGHT
• Birthday: dd=day, mm=month, yy=year
• Sex: Male/Female
• Activity: Top/High/Moderate/Low
• Heart Rate: HR
max
, HR
sit
• VO2max: Maximal oxygen intake
Activity Level
Activity level is an assessment of your level of long-term physical activity. Select the alternative that best
describes the overall amount and intensity of your physical activity during the past three months.
ENGLISH
Settings 39