Filter
Top Products
Set the distance you are going to ride, and the cycling computer will calculate and display the estimated
time of arrival based on cycling speed. Install the Polar Speed Sensor on your bike to measure speed and
distance. For further information on installing the speed sensor, consult Polar Speed Sensor user manual.
• Select by pressing OK
• Select On/Off to set the feature on or off.
• Select Set dist. to set the distance you are going to ride.
Autostart: On / Off
Select Settings > Bike > Bike1 > Autostrt
The Autostart function starts or stops automatically the exercise recording when you start or stop cycling.
The Autostart function requires Polar Speed Sensor W.I.N.D.
Power*: On / Off
You can install an optional power sensor onto your bicycle.
To activate the power sensor in your cycling computer, select Settings > Bike > Bike 1 > Power > On. Teach
new sensor? is displayed.
• If your sensor is already taught, select No.
• If your sensor has not been taught yet, see Using a New Accessory (page 55) for more information on
teaching.
Power settings: You need to enter the chain weight (g), chain length (mm) and span length (mm) into the
cycling computer to measure correct power information.
If you use the Polar LOOK Kéo Power system, follow the instructions below:
Select Settings > Bike > Bike1, Bike 2 or Bike 3 > Power > Settings and
> Set chain weight 304 g > OK
> Set chain length 1473 mm > OK
> Set span length 420 mm > OK
For the Polar LOOK Kéo Power system to work properly, the cycling computer must use the default power settings.
Even if you know the correct settings for your bike, do not use them.
If you use the Polar Power Output Sensor™ W.I.N.D., follow the instructions below:
Select Settings > Bike > Bike1, Bike 2 or Bike 3 > Power > Settings and
> Set chain weight in grams > OK
> Set chain length in millimeters > OK
> Set span length in millimeters > OK
Examples of chain weights and lengths (Due to the variation of the measurements, Polar cannot be held
responsible for their validity):
Weight Length
Shimano Dura-Ace CN-7700
Super narrow HG
280 g 1473 mm
ENGLISH
38 Settings