Filter
Top Products
39
Nautilus® TreadClimber® Model TC916 Assembly Manual
Step 14: Inspecting Assembly
Congratulations!
Now that you have assembled your Nautilus
®
TreadClimber
®
Model TC916, it is VERY IMPORTANT to
tighten all screws and bolts, and visually inspect the
TreadClimber
®
exercise machine. If your TreadClimber
®
machine sits unevenly you may adjust the leveling feet
on each corner of the machine by hand to make the unit
stable on your floor. Make sure that your TreadClimber
®
exercise machine has been assembled correctly and
securely, and that there are no loose, uncovered, or
unattached parts prior to use.
7 ! 2 . ) . '
! 4 4 % . 4 ) / .
$ ! . ' % 2
)--%$)!4%!#4)/.2%15)2%$
# ! 5 4 ) / .
Failure to visually check and test assembly
before use can cause damage to the
Nautilus
®
TreadClimber
®
Model TC916
exercise machine and serious injury
to users and bystanders and can also
compromise the effectiveness of your
exercise program.
Step 13: Turning on the Power
Locate the following for this step:
Parts:
• Assembly from Step 12
13-1 Locate the power switch at the front of the
machine.
13-2 Move the power switch to the ON position (see
Figure 13).
IMPORTANT! REFER TO THE OWNER’S
MANUAL FOR DETAILED INSTRUCTIONS AND
INFORMATION ON HOW TO USE AND CARE FOR
YOUR TREADCLIMBER® COMMERCIAL SERIES
EXERCISE MACHINE, MODEL TC916.
Figure 13: Turning on Power
Power Switch
ASSEMBLY INSTRUCTIONS