Filter
Top Products
36
ASSEMBLY INSTRUCTIONS
Step 9: Attaching Rear Motor Cover
Locate the following for this step:
Parts:
• Assembly from Step 8
• Rear Motor Cover (P/N 17874)
Hardware:
• 6 screws (P/N - 17815)
• 6 washers (P/N 17578)
Tools:
• Phillips screw driver
9-1 Attach the Rear Motor Cover using 6 screws and 6
washers. See Figure 9.
IMPORTANT! MAKE SURE THAT FREE END
OF GROUNDING STRAP INSTALLED IN STEP 3
IS ABOVE REAR MOTOR COVER. IT WILL BE
INSTALLED IN STEP 10 OF ASSEMBLY PROCESS.
Figure 9: Attaching Rear Motor Cover
Base Assembly
Rear Motor Cover
Screws
Washers