Filter
Top Products
19
Nautilus® TreadClimber® Model TC916 Assembly Manual
MOVING INSTRUCTIONS
NOTE: You should only use this step if you need to
rotate the lower base unit up onto its side to
transport it.
3.0 REMOVING BASE PLASTIC
Tools Needed: 1/8 Allen bit
Step 1: Remove three (3) front plastic screws
(see Figure 3-1).
Step 2: Remove right and left side plastic covers - four (4)
screws each side (see Figure 3-2).
Step 3: Remove right and left side pan covers - two (2)
screws each side (see Figure 3-3 and Figure 3-4).
Figure 3-1
Figure 3-2
Figure 3-3
Figure 3-4:
Pan without
covers.