Filter
Top Products
21
Nautilus® TreadClimber® Model TC916 Assembly Manual
MOVING INSTRUCTIONS
Step 5: On the right side, lift the machine and remove the block of wood, lowering the machine onto the Caster Cart and
Wheel Bar, ensuring the wheels are straight.
Step 6
: On the left side, lift the machine and remove the block of wood, lowering the machine onto the Caster Cart and
Wheel Bar, ensuring the wheels are straight (see Figure 2).
Step 7:
The machine is now ready to move.
a. This moving tool is designed to move the TC916 in and out of a row of machines. It is not intended to move the
machine long distances or over obstacles.
b. Once the machine is out of the row other moving methods can be employed to move the machine to another room
or in/out of the club.
c. This tool is designed as a service aid and not for transportation.
d. DO NOT operate the TC916 while it is on the Caster Cart.
Step 8:
When service is completed or the machine needs to be operated place the machine where it is desired and reverse
the steps removing the Caster Cart and Wheel Bar.