Filter
Top Products
35
Nautilus® TreadClimber® Model TC916 Assembly Manual
ASSEMBLY INSTRUCTIONS
Step 7: Securing Console
Locate the following for this step:
Parts:
• Assembly from Step 6
Hardware:
• 4 screws (P/N 24162)
Tools:
• 5/32 Allen bit
7-1 Align the holes on the tubing of the console with
the holes on the handrail and secure Console (P/N
- 17670) in place using 4 screws (P/N - 24162). See
Figure 7.
Step 8: Attaching Lower Plastic Covers
Locate the following for this step:
Parts:
• Assembly from Step 7
• Right Bottom Plastic Pivot Cover (P/N 17919)
• Left Bottom Plastic Pivot Cover (P/N 17918)
Hardware:
• 14 screws (P/N 17815)
• 14 washers (P/N 17578)
Tools:
• 1/8 Allen bit
8-1 On the right side, attach Right Bottom Plastic Pivot
Cover (P/N - 17919) using the 7 screws (P/N - 17815)
and 7 washers (P/N - 17578). See Figure 8.
8-2 Repeat Step 8-1 on the left side.
Figure 7: Securing Console
Base Assembly
Handrail Assembly
Console
Screws
Figure 8: Attaching Lower Plastic Covers
Base Assembly
Right Bottom
Plastic Pivot
Cover
Left Bottom
Plastic Pivot
Cover
Screws
Washers