Filter
Top Products
WalkingWalking
Walking
BeltBelt
Belt
AdjustmentAdjustment
Adjustment
If either of the walking belts track too much to one side, adjustments can be made at the Front Roller
of each Treadle.
BeltBelt
Belt
AlignmentAlignment
Alignment
CheckCheck
Check
– Stand adjacent to the unit and set the speed to 1.5 MPH. The alignment adjustment
bolts are on the front end of each Roller. If the belt is tracking too far to the right, use the provided Hex Key
to turn the right adjustment bolt clockwise on that belt in full turn increments. If the belt tracks too far to
the left, do the same thing on the left adjustment bolt.
Note:Note:
Note:
Do not turn the bolts counterclockwise when you adjust the belt alignment.
BeltBelt
Belt
TensionTension
Tension
CheckCheck
Check
– Correct belt tension should only allow a nger to t snugly below the belt’s midpoint.
Carefully slide a nger under the belt to test it when the machine is unplugged. If the belt is loose, turn
both bolts clockwise one full turn and check tension again. Repeat this step if necessary.
Note:Note:
Note:
Bolts are turned counterclockwise to decrease belt tension.
A
Adjustment Bolts
1818
18