Chapter 3 Viewing the BCM50 system LEDs 63
BCM50 Installation and Maintenance Guide
Ethernet router LEDs (BCM50e only)
The three Ethernet router LEDs on the BCM50e monitor the router status and the WAN port.
Figure 23 shows the location of the three Ethernet router LEDs.
Figure 23 Ethernet router LEDs on the BCM50e main unit
Table 12 describes the possible Ethernet router LED states.
Table 12 LAN port LED indicators
LED Status Description
Router status
On The router card is functioning properly.
Off The router card is not ready or has malfunctioned.
Flashing The router card is rebooting.
WAN port yellow On The WAN port is operating at 10 Mb/s.
WAN port green On The WAN port is operating at 100 Mb/s.
Any WAN port
LED
Flashing
The WAN port is sending or receiving network data. The frequency of the
flashes increases with increased traffic.
Both WAN port
LEDs
Off
No connection.
Router
status
WAN port
LEDs
WAN port LEDs
