Appendix K System region attributes 235
BCM50 Installation and Maintenance Guide
System defaults
Table 58 compares the system defaults for the North American, Global and UK regions. In
addition, the following functionality applies:
• Regions for Denmark, Holland and Sweden are the same as the Global region except for the
default to local languages and local tones and cadences.
• The Region for the Caribbean is the same as the North American region except that it supports
the M7000 telephone.
• The Region for CALA is the same as the Caribbean region, except NI ISDN is replaced by
ETSI ISDN (u-law).
Table 58 Region defaults (Sheet 1 of 2)
Functionality Attribute North American Global United Kingdom
Direct Dial Access code 0 0 0
DTMF parameters Tone duration 120 msec 120 msec 120 msec
Pause time 1.5 1.5 3.5
Interdigit time 80 msec 80 msec 100 msec
Conference tone disabled disabled enabled
PCM Companding Law mu-law a-law EBI a-law EBI
OLI digits variable length
digits:minimum=
DN length,
maximum=10
variable length to
a maximum of 15
digits
variable length to a
maximum of 15
digits
Dial Tone Detection enabled enabled enabled
Hunt Groups Default delay 4 ring cycles 4 ring cycles 4 ring cycles
Queue timeout 60 sec 60 sec 60 sec
If busy busy tone busy tone busy tone
Mode broadcast broadcast sequential
Target line if busy setting prime prime busy tone
M7000 set disabled enabled enabled
Fax switch enabled enabled enabled
Service Schedule time Night start 23:00
end 07:00
start 23:00
end 07:00
start 23:00
end 07:00
Evening start 17:00
end 23:00
start 17:00
end 23:00
start 17:00
end 23:00
Lunch start 12:00
end 13:00
start 12:00
end 13:00
start 12:00
end 13:00
Service 4 start 00:00
end 00:00
start 00:00
end 00:00
start 00:00
end 00:00
Service 5 start 00:00
end 00:00
start 00:00
end 00:00
start 00:00
end 00:00
Service 6 start 00:00
end 00:00
start 00:00
end 00:00
start 00:00
end 00:00
Call Forward Delay Default disabled disabled disabled
